Originally Posted by
joecar
Ok, your calc_pid.txt is empty... see attached, rename it to calc_pids.txt and drop it in that folder (see post #38).
Then:
drop these pids:
- E38. AFRATIO_DMA
- SAE.BARO
- CALC.BEN_E38
- CALC.BEN
- GM.CORRRCALC (I think this might be for oilers)
- GM.AFR (does not work properly on your ECM)
- EXT.DYNLAMBDA (if you're not connecting to dyno's serial comms)
add these pids:
- SAE.LAMBDA (you already have this)
- CALC.WO2BEN
Then, if you run OL:
- on the map you will now use CALC.WO2BEN instead of CALC.BEN1 or CALC.BEN1_E38.
If you run CL:
- on the map you will use CALC.SELBEN (need to also select pids CALC.LTFTBEN, CALC.TRIMMING).
You are using the wideband's serial connection, right...?