Originally Posted by
Tre-Cool
Take a look at the included AutoVE Tuning Tutorial included with the software. from the editor go to help --- tutorials.
In that document I give a couple examples on how to create custom pids, which is what your going to need to do so you can create maps/charts for your wideband afr/lambda & subsequent BEN factor.
If you have tied into your a/c port then you going to need to log that specific 0-5v pid and reference that in your new "custom pid".
to get you going something like this should help to get your wideband voltages into an working afr.
*CLC-00-007
V 0.0 5.0 .1 "{GM.ACP}"
AFR 10.0 20.0 .2 "{GM.ACP}*2+10"
lambda 0.5 1.5 .4 "{CALC.AFR_ACP}/14.68"
CALC.AFR_ACP F001 CLC-00-007 "AFR,lambda,V" WO2-Analog "Wide Band AFR ACP"