Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Were are all the Ben factros and calc pids for E67s? I'm so lost on logging

  1. #11
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Let's take one step at a time...

    attach your calc_pids.txt file here.

  2. #12
    Senior Member
    Join Date
    Feb 2009
    Posts
    148

    Default

    Quote Originally Posted by Tre-Cool View Post
    I would give up using the e67 afr. You should just use the sae.lambda pid for commanded fueling.

    I also don't understand why your trying to log stft/ltft if you want to use a BEN pid. You want to be in full open loop when making changes to your VVE or MAF scale.

    Yes, I reenabled the trims to use them instead of the wide band was told narrow bands were more acrraute at part to mid throttle. Ltft1+stft2+stft1+stft2/200+1. Is the formula I want then use wide band for upper maf hz and pe

  3. #13
    Senior Member
    Join Date
    Feb 2009
    Posts
    148

    Default

    Here is my calc_pids file, Before I did a last ditch change to hpt formula.
    Attached Files Attached Files

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Use SAE.LAMBDA instead of E67.AFRATIO.

    See my reply in your other thread: Were-do-I-find-Ben-factor-LTFT-or-any-ben-factor-I-don-t-see-any-ben-in-my-pids

  5. #15
    Senior Member
    Join Date
    Feb 2009
    Posts
    148

    Default

    ok I think I'm close with all these just needs some tweaks guys, here is mi pids, map, and latest calc_pids file. getting a red x through BEN_PLX1_E67 i need to have someone create a ben_ngk_afx_e67 maybe??? confused I still have no clue how to do the LTFT+STFT/200+1
    e67_Default_ve_custom.pid
    calc_pids2.txt

    rename to .map
    e67.VE_PLOT2.txt
    Last edited by 04colyZQ8; April 3rd, 2017 at 04:20 AM.

  6. #16
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by 04colyZQ8 View Post
    Ok, give me a few mins to integrate your STFT pid.

  7. #17
    Senior Member
    Join Date
    Feb 2009
    Posts
    148

    Default

    ok thanks, btw i cant get speedo to show on the scanner? pid is selected and valid??

  8. #18
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Sae.vss...?

  9. #19
    Senior Member
    Join Date
    Feb 2009
    Posts
    148

    Default

    Yeah pretty sure it's selected? You can see my pids

    Maybe it's because it's a manual trans? Factory 07 ctsv manual os, so it should work, trucks speedo works, hp tuners scanner picks up the speed, even showed speed all the way up to 227km/hr (private road of course

  10. #20
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post your tune file... SAE.VSS should show up.

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. So lost on Calc.VE tuning
    By Babydeuce in forum Gen III V8 Specific
    Replies: 19
    Last Post: August 18th, 2015, 10:25 AM
  2. E38 Calc Ben requires fixing?
    By Tre-Cool in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: September 28th, 2013, 02:26 AM
  3. lost on calc.vet
    By Cool28 in forum Gen III V8 Specific
    Replies: 18
    Last Post: June 21st, 2013, 06:21 AM
  4. BEN is only for analog, right? How do I log BEN with serial logging?
    By Supercharged111 in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: July 12th, 2009, 05:08 PM
  5. Logging BEN factor with March 20th Beta?
    By Goldfinger911 in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: March 23rd, 2008, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •