Originally Posted by
joecar
So you can read the wideband voltage thru the pid GM.ACP...?
See attached pdf, is this the same as you NGK AFX...?
If so then see attached calc_pids.txt... you will use the pid CALC.WO2BEN (which uses the pids SAE.LAMBDA and CALC.WB.LAM).
I need to see the log file, tune file, and some screenshots to see what went wrong.
See attached calc_pids.txt... the pid CALC.SELBEN does exactly what you want (LTFT's for PT, WB for WOT/PE).
Are you sure you want LTFT+STFT...? If so, you can add a pid for this and edit the SELBEN pid to use this instead of LTFTBEN (do you want me to do it for you...?)
BTW: calc_pids.txt file needs at least 2 blank lines at its end.