Results 1 to 5 of 5

Thread: FlashScan V2 immo remove

  1. #1
    New Member
    Join Date
    Mar 2017
    Posts
    4

    Default FlashScan V2 immo remove

    Hi EFILive forum,it's my first thread so i want to know if i can remove immo to gm E92 pcm 2014-2015 for swap,i know than it's work for gm LS1 98-2000,because for now i just have scan option i use for vin change and scan if i want to have flash option i need to pay $450.00 usd for activate flash function with 2 licence keys for this reason i don't want to pay if it's not work,please if someone can help,thanks in advance.

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,935

    Default

    Hi, so you want to remove VATS on the E92 ECM to run in a standalone swap, is that correct? I havent done a VATS delete on one of these ECMs, however the Disable patch is available under Engine Operation -> Operating System Patches when the V2 is plugged in. Can you read one of your ECMs out, plug your V2 into the laptop, then open the file in V7.5 and see if that option appears for you? If it does, you should be ready to go after purchasing the GM Tuning option.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    New Member
    Join Date
    Mar 2017
    Posts
    4

    Default

    Hi,thanks to ScarabEpic22 for your support,my customer just give up for his project but i keep infos for other job,thanks again.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Can you post the tune file please, I want to look at it anyway (customers always seem impatient).

  5. #5
    New Member
    Join Date
    Mar 2017
    Posts
    4

    Default

    Hi,i never had time to connect to ecm,i just had ecm no vehicle i waiting for vehicle to connect it's more easy than connect on bench,when i have other i read and backup for post,thanks.

Similar Threads

  1. Remove DBW
    By jojonoumea in forum Gen III V8 Specific
    Replies: 2
    Last Post: June 8th, 2016, 10:30 PM
  2. how to remove maf
    By streetracersgd in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: January 22nd, 2016, 04:30 AM
  3. 97-98 remove drive by wire
    By v8vegaman in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: September 14th, 2007, 12:37 AM
  4. Gmc Yukon Immo
    By car_tech4 in forum Gen III V8 Specific
    Replies: 1
    Last Post: November 19th, 2006, 02:24 PM
  5. help i cant remove speed limiter
    By 5.3 in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: August 13th, 2005, 12:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •