If you use analog connection:
- connect LC-2's analog signal wire (brown; check your user manual pdf) to FSV2 AD1+;
- connect LC-2's ground to FSV2 AD1-;
- log EXT.AD1, CALC.AFR_LC11 and CALC.BEN_LC11 (LC-2 is same as LC-1) or some of the newer BEN pids (see below).
If you use serial comms:
- use a null modem adapter (gender bender) to connect LC-2's serial comms port to FSV2's serial comms jack;
- log the pids EXT.WO2xxx1, and the newer BEN pids (see below).
See here:
LC-2-Digital-Wideband-anyone-try-it-out
We can edit a calc_pids.txt file to have the newer BEN pids for your wiseband and commanded fuel pid.