Results 1 to 5 of 5

Thread: New to EFI - Map Tracing?

  1. #1
    New Member
    Join Date
    Apr 2017
    Posts
    9

    Default New to EFI - Map Tracing?

    Just picked up a V2 a bit ago and got a hold of a map for my LML.

    Is there map tracing for this software though? I don't care about doing live tuning, but I find map tracing to be very useful and save time when tuning other cars.

  2. #2
    Junior Member
    Join Date
    Apr 2017
    Posts
    10

    Default

    No. Its not like aftermarket ECU's. Use data and read that then figure out what you want to change.

  3. #3
    New Member
    Join Date
    Apr 2017
    Posts
    9

    Default

    Aftermarket ECUs? I've done this plenty of times on OEM ECUs which is why I ask.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    By map tracing do you mean dynamically tracing the operating cell in some table in the calibration...?

    If so, look at the axeys of the table of intetest in the tunetool, take note of the link pids mentioned... log these pids in the scantool... there's a setting in the scantool for linking logged pids to the tunetool, and for runway highlighting to make it more obvious.

    ~ by phone ~

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ( for some reason Tapatalk is not letting me fix my spelling typos )

    axes

    ~ by phone ~

Similar Threads

  1. MAP offset and MAP scaler
    By RADustin in forum Gen III V8 Specific
    Replies: 2
    Last Post: March 17th, 2015, 12:59 AM
  2. Map sensor problem in efi live scan tool
    By zayne0 in forum Petrol / Gas
    Replies: 10
    Last Post: October 22nd, 2014, 11:17 PM
  3. EFI RWHP and EFI RWTQ
    By dbaxter_ss in forum Tips and tricks
    Replies: 65
    Last Post: July 26th, 2010, 02:43 AM
  4. Efi live class at efi university
    By Robbie The Wrench in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: September 1st, 2008, 01:25 PM
  5. Changing from a 2bar map to a 3bar map?
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 4
    Last Post: December 23rd, 2006, 03:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •