Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39

Thread: how to update the VE map to cutom 2-3 bar table

  1. #1
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default how to update the VE map to cutom 2-3 bar table

    Hello everyone. I am looking for some help on installing custom2-3 bar ve table.
    Thank you

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

  3. #3
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default

    where do i find Tun file 03150003

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You find the empty COS tune file here: C:\Users\<you>\Documents\EFILive\V7.5\Bins\Custom OS

  5. #5
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default

    oh I c thank you !!

  6. #6
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default

    Well I Have updated to the custom OS following the EFI Tutorial manual. Truck wont start, seams like it wants to but no Go. Smells rich when cranking. EFI tutorial said it is a good base map. Is that true. Any advice?
    Thank you

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Did you fix up table B3647...?

    Did your engine start and run on the GM tune...?

    Post your tune file.

  8. #8
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default

    Hello Joe. Sorry I had to disappear for a few. My truck is all complete and had it running on a bad tune of course. As per your directions I was able to upload custom map and follow efi live instructions. Now the truck wont start. Tuning is all that's left so I am back on this project. will post pics as well as the tune file if you are still interested to take a look.
    Thanx again

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Look at table B3647, does it contain the data from the old B3605...?

    Post your old tune (before COS upgrade) and your current tune (after COS upgrade).

  10. #10
    Junior Member MadBeaver's Avatar
    Join Date
    Apr 2017
    Posts
    20

    Default

    thank you talk soon

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Updating 2 bar to 3 bar map sensor
    By badls1 in forum Gen III V8 Specific
    Replies: 2
    Last Post: November 2nd, 2015, 11:40 AM
  2. 3 bar Map ?
    By RandyWS6 in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 0
    Last Post: January 7th, 2015, 12:50 PM
  3. Tuned as a 2 bar MAP but is actually a 3 bar
    By barbermi in forum Gen III V8 Specific
    Replies: 2
    Last Post: March 22nd, 2012, 02:24 PM
  4. COS 3.3 bar map only reading 2.5 bar
    By BAD BOB in forum FlashScan V2
    Replies: 0
    Last Post: August 8th, 2011, 11:27 AM
  5. 3 Bar MAP sensor doesn't work with 3 Bar scaling!
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: April 27th, 2010, 04:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •