Hey guys. What maps should i build and monitor. Installed the MS3 cam on my 00 c5 M6. Headers, catback, pully, ls6 intake, cam ect ect. I have KR vs RPM map so far. What else should i check out. What other maps should i build? THX
AB
Hey guys. What maps should i build and monitor. Installed the MS3 cam on my 00 c5 M6. Headers, catback, pully, ls6 intake, cam ect ect. I have KR vs RPM map so far. What else should i check out. What other maps should i build? THX
AB
Honestly it is up to you. It shouldn't depend on the cam as to what maps you are using. This is what I run.
VE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT
There are others but that gives you an idea.
I think we should have a "MAP" Section Under Scanning in the Forums. This way users can post there .map files to share with other users. Really helps clear things up for new users.
2000 Corvette Twin Turbo
2004 CTS-V TVS 1900
2006 TBSS TVS 1900
All Tuned by
Rad Tunes by Troy
aka Vetteboy2k
I do the above andVE Table - AFR
VE Table - BEN Factor
Spark Table - Retard
Spark Table - Total Timing
MAF Table - BEN Factor
Desired Airflow - LTIT/STIT
Spark scaler
CMD AFR
Actual AFR
KR
Oh and working on moon phasing
\"You Can Never Have Enough Horsepower\"