Results 1 to 6 of 6

Thread: E92 2014 Corvette LT1 A6 - A&A S/C + Headers + E85 - Some Tuning Questions/Concerns

  1. #1
    Senior Member
    Join Date
    Oct 2015
    Posts
    107

    Default E92 2014 Corvette LT1 A6 - A&A S/C + Headers + E85 - Some Tuning Questions/Concerns

    I'm having 2 separate issue's I'm trying to tackle on this car. Mods below:

    2014 Corvette Stingray Z51
    A&A Si V3
    Kook's LT headers 1-7/8"
    TR7 plugs
    DMS Flex Fuel kit
    LMR vacuum system

    I have a Corvette I tuned a while back.
    He brought the car back with the DMS Flex Fuel Kit that he wanted installed.

    I went through the file and changed the parameters around for the Flex Fuel
    I tested the sensor and I am, in fact, receiving the appropriate Ethanol content through the PID.

    1st ISSUE:
    When making a pull on the dyno, I am running out of fuel on the high pressure side. Has anyone come across this before?
    What are my options (without doing a cam or fuel upgrade swap).
    I'm asking because I'm at 500rwftlb of torque and it seems like people are getting more power then that out of these cars....

    I'm running out of fuel about the 4,000RPM Range
    AFR is about 12.2 (and holding steady)(which is what I'm commanding as I JUST started tuning for the E85).


    I'd like to keep my file private, but don't mind sharing I can just email or PM it to you.
    I will post my datalogs, though.WOT 3.efi


    2nd ISSUE:
    The "Absolute Throttle Position" seems to change a lot!!!!
    I can feel it at a steady cruise on the freeway (I know I'm overly sensitive, but still).

    Here is the datalog:
    WOT 3.efi

    As you can see, I'm holding the actual pedal at one location (I'm on a load bearing dyno). But the "Absolute" changes quite a bit.

    Here is my fear:
    That I maxed out a table I shouldn't have. TYPICALLY, I like to "blend" things in so as to have the computer a good pathway to compute calculations, especially when it comes to torque modeling.

    Any help in these 2 matters, or a place to go look experiment with would be greatly appreciated.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm look at your logs later tonite... can you post the stock tune.

    ~ posted by phone ~

  3. #3
    Senior Member
    Join Date
    Oct 2015
    Posts
    107

    Default

    E92 - 2014 CHEV CORVETTE Z51 AUTO - BASE FILE (12660065).ctz

    Of course!
    I can send you my file as well, if needed.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm running behind, and now it's 2:00am, I don't know where all the time went... I'll continue tomorrow.

  5. #5
    Senior Member
    Join Date
    Oct 2015
    Posts
    107

    Default

    Quote Originally Posted by joecar View Post
    I'm running behind, and now it's 2:00am, I don't know where all the time went... I'll continue tomorrow.
    No worries
    I always appreciate the help.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'll continue throughout the day.

Similar Threads

  1. E92 lt1 c7 vvt tuning with an aftermarket larger cam
    By tblu92 in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 0
    Last Post: November 30th, 2016, 07:41 PM
  2. 2014 Corvette LT1 DI Motor Injectors....oh boy...
    By Redline Motorsports in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 56
    Last Post: June 6th, 2014, 03:30 AM
  3. Looking for CAGS delete for a 2014 C7 with the E92
    By DaveGuy in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 7
    Last Post: May 6th, 2014, 05:15 AM
  4. E92 2014 t43 OS not supported?
    By blazinblue in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 12
    Last Post: May 5th, 2014, 03:19 PM
  5. E38 Corvette DBW Tuning Questions
    By gpr in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: March 24th, 2014, 09:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •