Results 1 to 3 of 3

Thread: SAE.MAP reading lower than expected in C7Z06

  1. #1
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default SAE.MAP reading lower than expected in C7Z06

    Today i was tuning the first 2015 C7Z06 With upper and lower pulley
    I noticed for the first time with KOEO its reading 64 kpa and @WOT 125 kpa ( we are on see level so it should read something like 100-101 kpa KOEO )

    Is there any other PID to log with C7Z06 ? I tried GM.MAP2 GM.MAP3 but non of them seems to work
    Any help will be appreciated

    Thanks in advance
    EFILive Tuner

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Is it the stock MAP sensor? If no did you scale it to read correctly at KOEO?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    Yes atoxk MAP sensor
    And after i asked it seems to be a common issue in C7Z06 and new ZL1
    Even with hp tuners
    EFILive Tuner

Similar Threads

  1. SAE.AAT now reading 32
    By dennisscars in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 4
    Last Post: December 27th, 2011, 09:21 AM
  2. B8034 Has no effect on SAE.LOAD_PCT reading in E67
    By scdyne in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: May 4th, 2011, 08:05 AM
  3. Timing map starting point for PD blower and lower CR
    By MadMaxHSV in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 0
    Last Post: February 19th, 2011, 08:34 AM
  4. What is the deference between {GM.MANVAC} and {SAE.MAP}?
    By odd boy in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: April 24th, 2008, 05:37 AM
  5. GM.MANVAC vs. SAE.MAP
    By Lennart in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: May 20th, 2007, 03:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •