Results 1 to 5 of 5

Thread: Saving COZ and CTZ files

  1. #1
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default Saving COZ and CTZ files

    I got my tune pack from Ridgerunner and he send them in coz and ctz files. He said you full flash the stock tune then cal flash the other ones. I cannot figure out how to get them from the email onto my scan tool SD card. They are showing in the folder when i look at it on my pc but the scan tool isn't showing them.

  2. #2
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Tune files will not show up in the Scan folder, they will show up in the Tune folder. To setup your FlashScan V2 for BBX you need to....

    1. Ensure that your FlashScan V2 is setup to save files to the SD card. You'll find instructions here https://support.efilive.com/kb_artic...6425-AKLC-5907
    2. Ensure that your FlashScan V2 is setup for standalone features - you've selected the BBR controller and BBF controller and programmed the device. You'll find instructions here https://support.efilive.com/kb_artic...6659-YAHB-3781.
    3. You've then got 2 options to move the tune files to your FlashScan - either via the Quick setup or via EFILive Explorer, both methods are described here https://support.efilive.com/kb_artic...9562-EUAF-6679

    Once you've moved your tune files to FlashScan, reboot FlashScan and you will be able to see them in the [F2: Tune Tool] -> [F1: Tuning] in either the Program Full or Program Cal menus.

    Cheers
    Cindy

  3. #3
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,294

    Default

    You were sent a .bbx fie, it will install your tunes onto your device by following the WORD DOC.

    If you need me to resend the .BBX File and instructions I can do that as well.
    www.mscservices.net


    Tuner of many, many Duramax and Cummins Diesels.


  4. #4
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default

    Yes please resend cause i have been trying everything. timothyberlinski@gmail.com I opened efilive explorer and the file shows on the top section so I drag it to the bottom section and it shows there. But then when i open my scanner and go to tuning that file isn't there. And when I add it throught the BBX feature and hit the green + if i use search i can find the file but when i add it in it has a red x next to it and says not supported by this firmware. But My flashscan is all up to date and not showing any updates available.
    Last edited by pavetim; June 26th, 2017 at 02:54 AM.

  5. #5
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,294

    Default

    You don't drag anything, you press the "PROGRAM" button.

    Its a self installing process.

    You cannot use EXPLORER with a BBX file, you can only Use V8 Scan and Tune.

    The .bbx file will open up in V8 Scan and Tune and it will allow you to press one button and will do it all automatically for you.
    www.mscservices.net


    Tuner of many, many Duramax and Cummins Diesels.


Similar Threads

  1. 7.5 not saving changes to .tun files?
    By RevGTO in forum FlashScan V1
    Replies: 2
    Last Post: March 21st, 2015, 01:13 PM
  2. Any E92 .tun or .ctz files etc about to have a look at?
    By ringram in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 3
    Last Post: August 17th, 2013, 11:31 PM
  3. Files in CTZ or CTD
    By Mike@Vengeance in forum AutoCal
    Replies: 3
    Last Post: May 7th, 2012, 11:11 PM
  4. Saving ECM/TCM Files
    By Cougar281 in forum General
    Replies: 6
    Last Post: July 17th, 2006, 10:37 PM
  5. saving raw BIN files
    By SS2win in forum General (Petrol, Gas, Ethanol)
    Replies: 16
    Last Post: March 29th, 2005, 08:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •