Just wondering if there is any plans to support the CM2150 controller. I believe this would cover 2008-2010 HD cummins/off road.
Thanks!
Just wondering if there is any plans to support the CM2150 controller. I believe this would cover 2008-2010 HD cummins/off road.
Thanks!
Yes, it would have been supported in the initial release but the checksum methods Cummins used are inconsistent between the numerous reads we have from this ECM. So we decided to hold it off until we can come up with a way to process them all accurately depending on the method each ECM OS uses.
I no longer monitor the forum, please either post your question or create a support ticket.
Awesome news.
I've been on the brink of rewiring to use a different ECM, but it looks like with a little patience the CM2150 will be OK.
Thank you.
Any news on this?
CM2150 will not be supported on the first release, maybe early next year instead. We did enable reading for them so we could get some files but that is it.
The problem is there is three CM2150 versions, CM2150C, CM2150D and CM2150E. The 'E' is very different to the other two, unfortunately by the time we got to the point of making the software stable and not adding in anything else the CM2150's weren't ready to be added.
I no longer monitor the forum, please either post your question or create a support ticket.
Thanks, the reading and flashing was ok. As I said the issue was the differences in file structures and checksums between the CM2150C/D and the CM2150E.
I no longer monitor the forum, please either post your question or create a support ticket.
In to follow... first truck i get has to be a 2150!!! read was sent to support!
Joe Kupferschmid
Daves Diesel Angola
www.angoladavesdiesel.com
Diesel and gas tuning
Personal Vehicles tunes with efi 06LBZ, 05lly, 2002 Z28, 2004 Gto
Thanks Joe, apologies for the current unsupported status though.
I no longer monitor the forum, please either post your question or create a support ticket.
Any update on the 2150's? I've also got a couple of them that are ready to be done.
Thanks for the help!