Need some help, I bought the 30-0334 to be able to log with efi. I have an e39 ecm running a single wideband and the wo2s11 pid connected to my autocal, I have both the ecm and wideband controllers connected under 1 controller with no other controllers connected. When I go to log or display data, the wideband is only streaming data to my autocal for a few minutes then the streaming freezes. If I unplug then plug back in my autocal it reconnects and does the same thing. If I power down my wideband and reconnect it, it does not start streaming again. Why does this only stream for a few minutes?
Or is there a good place to look for this info
Maybe?
Need to make a post
...