Results 1 to 3 of 3

Thread: 3Bar for 03 Suburban file, MAP scanner values are stuck at 105 kpa

  1. #1
    New Member
    Join Date
    Jan 2014
    Posts
    7

    Default 3Bar for 03 Suburban file, MAP scanner values are stuck at 105 kpa

    Engine is a Gen 3 5.3 w/ ETC, stock computer, LSA blower and btr cam using stock style lsa rail and injectors, ZL1 lid with OE 3 bar MAP and IAT sensors in the lid. I flashed 03150003 for 3 bar SD w/ the last working file, and am getting set up for idle tuning. I started with the 288 scalar and no offset for the new MAP sensor. After making a few changes in effort to get it to idle, after the last flash it wouldn't start. It smelled like gas and had my wideband reading 10.0. Looking at the scanner, suddenly my MAP is stuck reading 105 KPA which makes sense to why it isn't starting. If unplugged, the pid now reads 0. I went back a few files to make sure it wasn't something I recently changed, but it won't move off of 105 for anything. I even flashed the base tune from the old OS to similar results, now reading at 40 KPA with the original scalar for the stock map. Has anyone else ran into this? This is my first experience with COS.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post your previous tune (GM) and your current tune (COS).

    Did you correctly edit B3647...?

  3. #3
    New Member
    Join Date
    Jan 2014
    Posts
    7

    Default

    I was able to get it sorted out this morning. When I wired the new pigtail for the 3 bar map, my Snap-On vantage had the wires on the outside switched which threw me. I found something on LS1Tech that set them the other way, which was helpful. Thanks anyways!

Similar Threads

  1. 105 kpa in boost ve table (cos3)
    By LS1Nova in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 1
    Last Post: April 18th, 2010, 08:11 AM
  2. Changing from a 2bar map to a 3bar map?
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 4
    Last Post: December 23rd, 2006, 03:31 PM
  3. Do the 105 kpa columns on custon o.s for main and boost VE "HAVE" to match???
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: July 20th, 2006, 03:30 AM
  4. boost tuning - 105 kPa table
    By SS2win in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 8th, 2005, 01:03 AM
  5. WOT MAP Values(kPa)
    By Black02SS in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: July 16th, 2005, 01:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •