Results 1 to 1 of 1

Thread: HELP please,2015 lml throwing p0101 and p0234

  1. #1
    Junior Member
    Join Date
    Jan 2007
    Posts
    44

    Default HELP please,2015 lml throwing p0101 and p0234

    I have a 2015 lml, deleted the dpf and scr
    now getting codes p0101 and p0234
    anyone know what needs to be tweaked to make ecm happy again.
    turning off the p0101 just results in a p0100
    i have tried setting maf high and low to 100% (in b0121 and b0125)
    have tried with egr on and off, plugged in and unplugged
    scaled maf sensor readings up and down (has stock air box so scaling was a long shot at best)

    i also notice the boost is limited at 250 kpa, but the ecm request goes as has as 296kpa in my logs

    i am loosing my mind chasing this, any direction at all would be appreciated

    I attached file if you want to take a look for me

    well I figured it out, no thanks to anyone here.
    Attached Files Attached Files
    Last edited by mrrattle; November 8th, 2017 at 05:04 PM.

Similar Threads

  1. 2015 lml trans limp
    By stang_j_99 in forum Duramax 2011+ LML / LGH
    Replies: 12
    Last Post: October 2nd, 2019, 01:18 AM
  2. 2015 LML Delete
    By Road in forum Duramax 2011+ LML / LGH
    Replies: 9
    Last Post: June 1st, 2018, 02:56 AM
  3. 2015 LML will not start!!
    By Cyrperformance in forum Duramax 2011+ LML / LGH
    Replies: 3
    Last Post: June 18th, 2016, 09:26 AM
  4. Tow tune throwing s P0401 and P0101?
    By Tarkstoys in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: November 22nd, 2009, 03:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •