Results 1 to 6 of 6

Thread: E98 bench flash

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    17

    Default E98 bench flash

    Anybody has the pinout to flash this ECM on bench ? CANH-CANL etc.

    thanks,
    Red

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    All connections to the middle plug.

    GND = 6
    Batt 12V = 4
    Ign 12V = 22
    CANH = 55
    CANL = 40

    Any reason you want to bench flash it rather than do it in the vehicle?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    17

    Default

    thanks Ross,

    Customer is far and is sending the ECM..

    btw, is it possible to deactivated the Immobilizer ?


    cheers,

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Are they doing a conversion?
    We were working with someone last month doing conversions in Europe and I never heard the final result on how they went.
    If you are shipping them a new ECM you can't really do that, the ECM needs to be set up IN the vehicle with TIS.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Junior Member
    Join Date
    Nov 2016
    Posts
    17

    Default

    No conversion.. The first customer just sent his ECM, and about the IMMO, I had a few requests to tune a second ECM to replace the OEM.. In case of
    a warranty call, they will put back the original one...

    As I don't have TIS, I was looking for a workaround.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Sorry, but additional things need to be set up like injector flow programming and various other learn items, TIS is needed.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. E98 Vats PAtch
    By SkyMadness in forum E98 2014+ Diesel ECM
    Replies: 18
    Last Post: January 14th, 2022, 07:28 AM
  2. HOW TO - Limit speed in E98
    By GabrielMga in forum E98 2014+ Diesel ECM
    Replies: 5
    Last Post: July 28th, 2017, 08:25 AM
  3. e40 no start after bench flash
    By JCA in forum Gen IV V8 Specific
    Replies: 0
    Last Post: February 15th, 2011, 09:49 PM
  4. has anyone had vtd problems after bench flash of costom os
    By madprof01 in forum Custom Operating Systems
    Replies: 1
    Last Post: April 26th, 2006, 12:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •