Results 1 to 7 of 7

Thread: Scan Tool playing up

  1. #1
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default Scan Tool playing up

    Have been data logging for the last 4 days without any issues but now when I use the V7.5 Scan tool it will connect to the ECM all good and go to start recording and it is all good starts recording but then no actual data is shown. If I go to the console tab it just shows it constantly loading the pids. Will run through them and say connected ok then starts again. I had also noticed if I just click monitor data it would just go to pause and wouldn't monitor this has been happening for ages. The strange thing is I can log data using V8? Have shutdown restarted computer but no change. Any of the programmers give any advice? All firmware is update and running latest versions.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Please post the console tab text here

    ( go Ctrl-A Ctrl-C to copy all of it, then Ctrl-V to paste it in a reply here )

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V7 build version (go Help->About)...?

  4. #4
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default

    Would do joe but my internet has been down for two weeks and have resorted to using my iPhone for everything but as luck would have it woke up this morning plugged into car and what would you know it's bloody working again.

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    lol, stuff happens

  6. #6
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default

    Yep that's it. While I have you joe have you had much to do with the e38s and the torque control settings?

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I've done a few E38's but I have not touched the torque control settings...

Similar Threads

  1. cant link scan tool to tune tool?
    By hpi_jeep in forum Cummins 6.7L
    Replies: 5
    Last Post: October 14th, 2013, 05:05 PM
  2. Replies: 22
    Last Post: June 20th, 2013, 02:45 AM
  3. Scan tool match tune tool?
    By zapp168 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 20th, 2008, 04:27 AM
  4. Replies: 4
    Last Post: January 6th, 2008, 10:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •