Results 1 to 6 of 6

Thread: Aug 2017, Beta Release 9

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default Aug 2017, Beta Release 9

    Please download and install both the V7.5 and V8 software packages.

    Download EFILive V7.5
    Download EFILive V8

    ATTENTION - BETA SOFTWARE RELEASE
    We strongly recommend that you do not install the beta software over the top of your production systems. It is possible that the beta test software may fail and your production system may not be recoverable. lf you conduct a tuning business, please take the necessary precautions to protect your business. EFlLive recommends beta testers use a separate FlashScan V2 device (when installing the latest beta firmware) and only install the EFlLive beta test software on a separate PC, laptop or virtual machine.

    Release Notes:
    Version Numbers:
    After installing this beta release you should have the following software, boot block, firmware versions installed:

    • EFILive V7 software: V7.5.10 Build 331 To view the installed version, select Help->About (in the V7 Scan or Tune software).
    • EFILive V8 software: V8.2.5 Build 323 To view the installed version, select Help->About (in the V8 Scan and Tune software).
    • Boot Block: V2.07.007 (Feb 07, 2014) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
    • Firmware: V2.07.121 (Aug 14, 2017) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


    Known Issues:

    Issue #1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.

    Issue #2:
    When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
    Workaround:
    EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Issue #3:
    PIDs with text values such as "FUELSYS1" and "FUELSYS2" are not displayed correctly in the V8 scan tool.
    Workaround:
    None. Will be fixed in the next update.

    Issue #4:
    When editing chart properties in the V8 scan tool, clicking in the Y-axis area of a chart to select it for editing has the unintended side effect of resetting that chart's Y-axis min/max values to their defaults.
    Workaround:
    None. Will be fixed in the next update.

    Issue #5:
    Modifying data in the trans section of some CMD/CME files may cause a checksum fault which in turn will cause a flash of that file to fail. V7 may continue to show the checksum as valid, but V8 will correctly show that the checksum is faulty.
    Workaround:
    None. Will be fixed in the next update.


    -
    Last edited by Blacky; August 23rd, 2017 at 11:52 AM.
    Before asking for help, please read this.

  2. #2
    Junior Member
    Join Date
    Oct 2011
    Posts
    35

    Default

    It seems like v7.5 may be calculating CMD checksum incorrectly. Any file saved in v7.5 Beta-8 or Beta-9 will show an invalid checksum in v8. The checksum shown in v7.5 between 2 different calibrations is showing identical.
    03 6spd

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I just tried a file here and it seems ok (OS 22100538), can you please tell me the OS you are seeing this on? Thanks.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Junior Member
    Join Date
    Oct 2011
    Posts
    35

    Default

    I just tried that OS as well as a few others. In any OS is seems to only have issues when a change is made is the trans data.
    03 6spd

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Ok thanks, I get the same result too on changing anything in the trans cals
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490
    Before asking for help, please read this.

Similar Threads

  1. Aug 2017, Beta Release 8
    By Blacky in forum Software Updates and Installation Help
    Replies: 7
    Last Post: August 21st, 2017, 12:45 PM
  2. July 2017, Beta Release 5
    By Blacky in forum Software Updates and Installation Help
    Replies: 26
    Last Post: August 9th, 2017, 10:11 PM
  3. July 2017, Beta Release 4
    By Blacky in forum Software Updates and Installation Help
    Replies: 25
    Last Post: July 10th, 2017, 02:42 PM
  4. April 2017, Beta Release 2
    By Blacky in forum Software Updates and Installation Help
    Replies: 25
    Last Post: June 29th, 2017, 02:06 PM
  5. April 2017, Beta Release 1
    By Blacky in forum Software Updates and Installation Help
    Replies: 17
    Last Post: April 18th, 2017, 01:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •