Okay, I've run your first log and it indicates that your fuel injectors are flowing around 41lbs with your fuel pressure. So why is your MAF table so high? I had to think about this, but then I realized that I had forgotten something you told me... you have a 103mm MAF housing. The larger housing means that you flow more air per unit of raw frequency. Mystery solved... and my fault for not paying enough attention to your list of mods.
Do a log of this tune update and I'll finish cleaning up your injector data. Try to get a hard decel in your log. You might have to lock the transmission into a lower gear to achieve that. Also, get at least 12,000 frames again.