Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Aug 2017, Beta Release 10

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default Aug 2017, Beta Release 10

    Please download and install both the V7.5 and V8 software packages.

    Download EFILive V7.5 (updated at 4:30pm PDT(USA) on Sunday Aug 27, 2017 to fix Known Issues #3, #4 and #5)
    Download EFILive V8

    ATTENTION - BETA SOFTWARE RELEASE
    We strongly recommend that you do not install the beta software over the top of your production systems. It is possible that the beta test software may fail and your production system may not be recoverable. lf you conduct a tuning business, please take the necessary precautions to protect your business. EFlLive recommends beta testers use a separate FlashScan V2 device (when installing the latest beta firmware) and only install the EFlLive beta test software on a separate PC, laptop or virtual machine.

    Release Notes:
    Version Numbers:
    After installing this beta release you should have the following software, boot block, firmware versions installed:

    • EFILive V7 software: V7.5.10 Build 334 To view the installed version, select Help->About (in the V7 Scan or Tune software).
    • EFILive V8 software: V8.2.5 Build 324 To view the installed version, select Help->About (in the V8 Scan and Tune software).
    • Boot Block: V2.07.007 (Feb 07, 2014) To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.
    • Firmware: V2.07.122 (Aug 23, 2017) To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.


    Known Issues:

    Issue #1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available and fully integrated with the V8 tuning tool software.

    Issue #2:
    When logging DMA PIDs (i.e. PIDs whose names end with "_M" or "_DMA"), if the ignition is switched off for an extended period while data logging but data logging is not terminated, then when the ignition is switched on again the data log automatically continues. However the DMA PIDs may no longer return valid data.
    Workaround:
    EFILive recommends stopping the data log and restarting the data log when switching off the ignition for extended periods.

    Issue #3:
    The following controller type files may not load correctly in V7.5 with the error "Integer Overflow": E35A (LBZ), E35B (LMM), E80, E81, E82 and E84.
    Workaround:
    Update to V7.5.10.334 available in the link at the top of this post.

    Issue #4:
    The following controller type files may display invalid checksums when opened in V7.5, even though the checksums in the file are correct: CMB, CMC, CDM and CME.
    Workaround:
    Update to V7.5.10.334 available in the link at the top of this post.

    Issue #5:
    Some CME tune files are not displaying some calibration tables correctly.
    Workaround:
    Update to V7.5.10.334 available in the link at the top of this post.

    -
    Last edited by Blacky; August 31st, 2017 at 08:01 AM.
    Before asking for help, please read this.

  2. #2
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    305

    Default Integer Overflow

    This appeared to start occurring after the firmware update but may have nothing to do with EFI Live at all. Anyways I need help.

    When opening a file in 7.5 I get a Integer Overflow error. Everything is working good on production software.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Integer overflow.PNG 
Views:	52 
Size:	39.4 KB 
ID:	21411  

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by Road View Post
    This appeared to start occurring after the firmware update but may have nothing to do with EFI Live at all. Anyways I need help.

    When opening a file in 7.5 I get a Integer Overflow error. Everything is working good on production software.
    Hi Mike,

    Can you please send me the tune file that is causing the error? Send to paul@efilive.com

    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by Blacky View Post
    Hi Mike,

    Can you please send me the tune file that is causing the error? Send to paul@efilive.com

    Regards
    Paul
    Never mind, I have found and rectified the problem. An updated download is available in the first post.

    Regards
    Paul
    Before asking for help, please read this.

  5. #5
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    305

    Default

    Quote Originally Posted by Blacky View Post
    Never mind, I have found and rectified the problem. An updated download is available in the first post.

    Regards
    Paul
    Occurred on all E35 ecm files. Thanks

  6. #6
    Senior Member
    Join Date
    Feb 2012
    Posts
    135

    Default

    I get a checksum error on all 5.9L Cummins auto or manual, csp5 and single flash. External Flash and Calibration Verification I have a red X next to both. Are we okay to flash 5.9 Cummins, I have one that needs to be updated?

    Click image for larger version. 

Name:	Screenshot 2017-08-25 20.41.35.png 
Views:	60 
Size:	71.3 KB 
ID:	21415

    Thanks

    Sam

  7. #7
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by 30 RUM View Post
    I get a checksum error on all 5.9L Cummins auto or manual, csp5 and single flash. External Flash and Calibration Verification I have a red X next to both. Are we okay to flash 5.9 Cummins, I have one that needs to be updated?

    Click image for larger version. 

Name:	Screenshot 2017-08-25 20.41.35.png 
Views:	60 
Size:	71.3 KB 
ID:	21415

    Thanks

    Sam
    No, don't flash it. I am seeing the same issue here. I will get it fixed asap and post an other update.

    Regards
    Paul
    Before asking for help, please read this.

  8. #8
    Senior Member
    Join Date
    Feb 2012
    Posts
    135

    Default

    Yeah, I just checked my other computer and reinstalled V7.5, all the maps for the 5.9L are not lining up. Is this something that will be completed tonight by chance, I have the truck sitting in the drive way.. Lol

    Thanks

    Sam

  9. #9
    Senior Member
    Join Date
    Feb 2012
    Posts
    135

    Default

    FYI V8 shows the file being good, and has different checksum's (I'm assuming the correct ones).

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by 30 RUM View Post
    Yeah, I just checked my other computer and reinstalled V7.5, all the maps for the 5.9L are not lining up. Is this something that will be completed tonight by chance, I have the truck sitting in the drive way.. Lol

    Thanks

    Sam
    Working on it right now... Hopefully it will be fixed in the next hour or two.
    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 2 12 LastLast

Similar Threads

  1. Aug 2017, Beta Release 9
    By Blacky in forum Software Updates and Installation Help
    Replies: 5
    Last Post: August 23rd, 2017, 11:52 AM
  2. Aug 2017, Beta Release 8
    By Blacky in forum Software Updates and Installation Help
    Replies: 7
    Last Post: August 21st, 2017, 12:45 PM
  3. July 2017, Beta Release 4
    By Blacky in forum Software Updates and Installation Help
    Replies: 25
    Last Post: July 10th, 2017, 02:42 PM
  4. April 2017, Beta Release 2
    By Blacky in forum Software Updates and Installation Help
    Replies: 25
    Last Post: June 29th, 2017, 02:06 PM
  5. April 2017, Beta Release 1
    By Blacky in forum Software Updates and Installation Help
    Replies: 17
    Last Post: April 18th, 2017, 01:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •