Results 1 to 1 of 1

Thread: 2016 LML injection timing ?'s

  1. #1
    Member
    Join Date
    May 2017
    Posts
    66

    Default 2016 LML injection timing ?'s

    Wondering if anyone has any insight on actual injection timing. The issue seems that my data is reading higher timing than commanded. In All my timing maps (made them all the same) the timing at say 35 mm3 and 1350 rpm my maps are at 2 to 3 degrees. When at idle which matches at 1 degree as soon as I hit the throttle and rpm comes up it quickly ramps the timing to 8.5. This is no where in any of my maps. Is it possibly adding pilot 1 and or 2 to base as you throttle up ? Here is my map which is now running pretty good. It rattles just a bit more off idle up to 1500rpm and when I noticed the timing ramping up that quick I assume that is why.
    Here is the map.
    Attached Files Attached Files

Similar Threads

  1. 2016 LML dirty tune ?
    By staytuned in forum Duramax 2011+ LML / LGH
    Replies: 8
    Last Post: September 1st, 2017, 12:08 AM
  2. 2016 lml tuning problems
    By chrisdgy in forum Duramax 2011+ LML / LGH
    Replies: 4
    Last Post: August 21st, 2017, 01:56 PM
  3. 2016 LML Post injection disable
    By DieselAdam in forum Duramax 2011+ LML / LGH
    Replies: 2
    Last Post: July 13th, 2017, 11:34 AM
  4. 2016 LML new ECM and TCM
    By jeffmarsh750 in forum Duramax 2011+ LML / LGH
    Replies: 30
    Last Post: June 3rd, 2017, 12:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •