04 LLY Crew cab
Complete LBZ intake
EGR is gone
PCV delete
resonator delete
EFI Live DSP5
It is not a normal PID, specific memory addresses per OS must be requested. I don't recall what that is on the VPW bus but it isn't normal SAE or GM Enhanced methods.
I no longer monitor the forum, please either post your question or create a support ticket.
I guess it depends on what truck you are messing with.
On VPW there is a Mode $23 request that will allow you to request data from specific memory addresses. Which is what you will need. You would need to request the Memory address that stores what DSP tune you are currently in. This address will vary by OS. I'm not sure 100% if mode $23 works correctly on the LB7 or LLY as I haven't messed with it in quite a while.
If not there is mode $2B and $2C that you can for sure use to request the Memory PIDs. But Im not sure that data structure can be supported by the ELM or TORQUE App As for that one you would have multiple PIDs structured into a single packet of data with a MAX of 5 or 6 packets IIRC.
It's all layed out in the SAE J2190 Documentation on how to use the different Modes.
Josh
'04 GMC LLY - L5P, Motech, 6-Spd Conv. ML Trans.
'05 GMC LLY - 250%, 12mm, 67mm Custom Turbo, 6-Spd Conv. ML Trans
'19 3500 RAM - Tuned Aisin 0_o