Had been thumbing through the CSP5 manual and started to read up on the switched tune (Grounding C2-38 to activate the tune). The idea was to use it as a "valet" or "anti-theft" tune. But then I came across this . . .

F1041 - "Used to Enable/Disable the PTO (Power Take Off) option. If using the plug C2, pin 38 discrete input to switch tunes then this must be set to disable."

Does this mean that to use the switched tune, manual high-idle can not be used? I currently have C2-22 grounded and use cruise to ramp up idle during the winter.