Results 1 to 10 of 71

Thread: lc1 BEN factor for auto ve leaning out afr

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Sep 2017
    Posts
    31

    Default lc1 BEN factor for auto ve leaning out afr

    Hi, I have a 408 running an ls1a pcm and i'm trying to run the auto ve tutorial. I followed it step by step and when I copied and pasted the BEN chart into my backup VE table it was a .8 multiplier across the board and it leaned the motor out even more then it already was. I attempted a second log of data to get even closer but was so lean the car just fell on its face after leaving the driveway I had to load an older tune back in. I was expecting to have some 1.x numbers on the chart since at certain rpms I was running a little lean. I'm still a beginner at tuning but I have done a lot of searching and can't find an answer. Something that seems funny is the tutorial wants the commanded AFR logged and it shows 8.62, I'm running e85 so I have my stoich input set to 9.7 i believe but I don't know why it wants such a rich commanded AFR.

    I attempted to attach my auto ve log, hopefully it shows my BEN factor and anything else you may need.

    thanks for any help/suggestions
    Attached Files Attached Files

Similar Threads

  1. V8 Scan - Calculated Ben factor
    By Tre-Cool in forum Tutorials
    Replies: 7
    Last Post: September 12th, 2017, 05:34 PM
  2. Replies: 30
    Last Post: April 8th, 2017, 09:59 AM
  3. Ben Factor Question
    By EVI in forum E37, E38 & E67 PFI ECM's
    Replies: 18
    Last Post: March 17th, 2010, 10:01 PM
  4. Auto VE Ben Factor
    By shane in forum Gen IV V8 Specific
    Replies: 2
    Last Post: June 20th, 2008, 10:34 AM
  5. Logging BEN factor with March 20th Beta?
    By Goldfinger911 in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: March 23rd, 2008, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •