Page 4 of 4 FirstFirst ... 234
Results 31 to 33 of 33

Thread: PLX SM AFR Serial

  1. #31
    Junior Member
    Join Date
    Apr 2009
    Posts
    23

    Thumbs up

    Finally ....

    Paul, thanks a million for the update and everything works perfect. Attached is the video using the same PLX wideband PID.
    https://drive.google.com/file/d/0Bw-...xIa3RITkk/view

    Since all the pictures of other users who used Photobucket is all missing I thought I will post a few pictures for anyone who needs them.

    I am using the PLX SM AFR GEN IV which is actually different from the older versions and now the TX sends out Wideband, Voltage, Sensor Health and Sensor Reaction. The firmware update to resolve this issue is the link below:
    https://forum.efilive.com/showthread...ublic-Release)

    You need a 3.3V TTL to RS232 Converter which makes everything very easy and less messy. On ebay for about USD 1 - 2.
    https://www.ebay.com/sch/i.html?_odk...+male&_sacat=0

    Connect the 3.3 V, GND and TX as shown below. I have used the main ground on the bottom side of the board for testing but this works fine too.
    Click image for larger version. 

Name:	PLXEFI01.jpg 
Views:	1551 
Size:	292.4 KB 
ID:	21626

    Connect the three wires to the converter module 3.3V, GND and TX Pin as labeled on the board.
    Click image for larger version. 

Name:	PLX EFI02.jpg 
Views:	1466 
Size:	251.7 KB 
ID:	21627

    And finally since the new version of PLX has lots of space inside, I guess it's a good idea to mount it on the back side of the board so you don't have wires hanging from inside the module.
    Click image for larger version. 

Name:	IMG_20171021_0439529.jpg 
Views:	1397 
Size:	793.7 KB 
ID:	21628
    Sorry guys for the side view since my porting skills didn't work out on the small metal frame that I really messed it up ...

    Thanks again to Paul and EFI live for the update.

  2. #32
    Junior Member
    Join Date
    Oct 2017
    Posts
    16

    Default

    Wow! I've been using the PLX equipment and had no idea it was so versatile, cool setup!

  3. #33
    New Member
    Join Date
    Mar 2021
    Posts
    1

    Default

    Hello to all,
    there is a "burn" Q1 tranzistor on SM-AFR Version 4.2 PCB.
    unfortunately i can not read the type of tranzistor which i have to replace.
    Does anyone knows the type of tranzistor i need? or if there is any photo of PCB, so to know what tranzistor i need?
    Thank you in advance.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20210316_181407.jpg 
Views:	1004 
Size:	1.03 MB 
ID:	23711  

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. PLX SM-AFR Serial upgrade
    By ntae in forum FlashScan V2 BB Logging
    Replies: 116
    Last Post: May 25th, 2017, 07:26 AM
  2. Plx sm-afr v2 serial mods
    By barbermi in forum FlashScan V2
    Replies: 20
    Last Post: April 16th, 2015, 04:56 PM
  3. plx sm-afr serial
    By blazinblue in forum General
    Replies: 4
    Last Post: June 23rd, 2009, 07:29 AM
  4. PLX SM-AFR Serial control not found.
    By aaronr in forum FlashScan V2 BB Logging
    Replies: 4
    Last Post: February 15th, 2009, 07:59 PM
  5. Anyone willing to convert my PLX to serial???
    By exploder in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: November 16th, 2008, 03:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •