Results 1 to 5 of 5

Thread: LS1B full flash issue

  1. #1
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default LS1B full flash issue

    I am re tuning a ls1b pcm I tuned a few weeks ago. I read the stock file out made my modifications and thought I full flashed the file back in with V8 on the initial tune with no issues at all. Well tonight while trying to retune I get an error 0532 anytime I try and full flash the PCM. It will accept a cal flash just fine which should net the results I'm looking for but I'm wondering why it will Cal Flash the PCM but not full flash the PCM. Keeps asking me to license the controller which I have already done. Also when looking at the licenses tab in V8 is it the ECM serial number that is licensed? I couldn't find the serial number in any of the list under my flashscan licenses.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V8 build version...?

  3. #3
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    2.5.316

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try V8 build 332 from here (also install V7 build 334 from here): Sep-2017-Release-Candidate-3

  5. #5
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    456

    Default

    If firmware is updated then I'll wait until the public release. I don't put RC on my production computer and no longer have a spare flashscan.

Similar Threads

  1. HELP: 2005 Avalanche PCM issue after full flash
    By warlock007 in forum Gen III V8 Specific
    Replies: 35
    Last Post: November 3rd, 2013, 04:45 AM
  2. LS1B idle issues after full flash
    By Wheelz in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 25th, 2013, 02:17 PM
  3. Pre Full Flash to Full Flash Tune Question
    By Donovan in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 13th, 2010, 11:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •