Results 1 to 10 of 28

Thread: E38 Oil Temp Sensor Input

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Oct 2010
    Posts
    81

    Default E38 Oil Temp Sensor Input

    Can someone shed a little light on the E38 table {G1218} Engine Oil Temperature Sensor options?

    I have some customers looking to switch from "Calculated" to "Sensor" in applications where aftermarket coolers are being used. High HP setups where they need to monitor the oil temp over CANbus data, and adjust tables {B5212} {B5213} {B5214} based on a actual sensor value rather than the factory calculated values.

    After a few hours of searching the web, nothing to clarify what ECM pin to use, or what these G1218 options actaully change. The - "Sensor and CAN message" is an interesting option. Is that input, from like IC or BCM, or related to output option??

    OS I'm testing on is 12628990, 09 LS3.

    Tks

    -K
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	G1218-Oil-Temp.jpg 
Views:	358 
Size:	172.6 KB 
ID:	21590  

Similar Threads

  1. Engine Oil Temp on LS1B
    By CR500 in forum Gen III V8 Specific
    Replies: 10
    Last Post: September 16th, 2014, 06:19 PM
  2. Logging Resistance Based Values - IE Oil Temp Sensor
    By Jasondt2001 in forum External A/D inputs
    Replies: 5
    Last Post: June 21st, 2009, 10:20 AM
  3. Current Gear and Oil Temp
    By kwhiteside in forum FlashScan V2 BB Logging
    Replies: 8
    Last Post: June 21st, 2009, 07:28 AM
  4. Oil Temp Acceptable Range
    By bobbycollier in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: January 20th, 2009, 01:45 PM
  5. Reading oil pressure and fuel temp on a LBZ
    By Jasondt2001 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 6
    Last Post: April 11th, 2008, 08:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •