Results 1 to 2 of 2

Thread: Sensor problem

  1. #1
    New Member
    Join Date
    Apr 2017
    Posts
    2

    Default Sensor problem

    Hello,

    I'm having problems with my Monaro VXR LS2 (E40). To give you some background as to what happened, I changed the clutch and flywheel and when I started the car I got an EML and the traction control was off (signaling a sensor fault), a quick check with EFI Live showed that the map sensor had a problem, upon inspection it was broken. I replaced the MAP sensor and the EML went away but the Traction Control remains off.

    I was told that when the car shows Traction Control off there is a fauly sensor somewhere, the problem is I don't know where. I've been told I can perform a full scan with EFI Live that will probably show me where the problem is, can anyone advise on how I do this?

    Many thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    In the V7 scantool:

    go Edit->Properties->Advanced and checkmark Check/Clear DTCs for All Modules, make sure all the buttons for Display DTCs are blue (i.e. active), and then click Ok.


    then go Info->Retrieve All Test Results... when this is donr, go view the results on the OBD II tab.

Similar Threads

  1. LBZ BP sensor vs MAP sensor readings
    By Don Z in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: May 20th, 2017, 12:52 AM
  2. Map sensor problem in efi live scan tool
    By zayne0 in forum Petrol / Gas
    Replies: 10
    Last Post: October 22nd, 2014, 11:17 PM
  3. Problem with DTC PO342 Camshaft Position sensor circuit low
    By LSXstart in forum Gen III V8 Specific
    Replies: 10
    Last Post: December 3rd, 2010, 02:35 PM
  4. TPS sensor problem
    By mr.prick in forum Gen III V8 Specific
    Replies: 14
    Last Post: February 19th, 2010, 05:06 AM
  5. PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
    By Jasondt2001 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 01:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •