Results 1 to 9 of 9

Thread: Locating a 2017 6.7L Cummins base file

  1. #1
    New Member
    Join Date
    Oct 2017
    Posts
    8

    Default Locating a 2017 6.7L Cummins base file

    All:

    I have a 2017 3500 Cummins and am having a difficult time locating a stock file.
    I am getting a GT to disable the encryption, but I haven't seen much information on how/where to obtain a base file.

    Thoughts?

  2. #2
    Senior Member
    Join Date
    Jan 2010
    Posts
    129

    Default

    Good Question! I may need to do this to a 16 model So I am also trying to find this info as well.

  3. #3
    Junior Member
    Join Date
    Oct 2015
    Posts
    46

    Default

    Goto starlite diesel they can help you

  4. #4
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,803

    Default

    CMD:
    Link Deleted

    CME Cab & Chassis:
    Link Deleted

    CME Pickup:
    Link Deleted

    Files were faulty, they have been deleted off Mega.
    Last edited by GMPX; November 29th, 2017 at 04:58 PM.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  5. #5
    Lifetime Member Move'n Up's Avatar
    Join Date
    Oct 2015
    Posts
    239

    Default

    Quote Originally Posted by GMPX View Post
    CMD:
    Link Deleted

    CME Cab & Chassis:
    Link Deleted

    CME Pickup:
    Link Deleted

    Files were faulty, they have been deleted off Mega.
    Thanks.
    I'll add them to the DropBox account.
    Last edited by GMPX; November 29th, 2017 at 04:58 PM.
    2006 Ram 2500 4x4, 5.9 CTD, Laramie, QC
    Fully Built 48RE, Billet Flex Plate, Triple Disc TC, 62/65 HE351cw
    2017 Corvette 3LZ Z06 M7 with Z07 Package

  6. #6
    New Member
    Join Date
    Oct 2017
    Posts
    8

    Default

    Quote Originally Posted by GMPX View Post
    CMD:
    Link Deleted

    CME Cab & Chassis:
    Link Deleted

    CME Pickup:
    Link Deleted

    Files were faulty, they have been deleted off Mega.
    I have downloaded them to my Dropbox. I am getting a few unusual errors.... When I try to open a 2013-2015 file, I get an unrecognized PCM error.
    V7.5 will open a 2016-2018 file with no issue. However, when I try to save any changes to these files. I get an error 400000 code. I now can't make any changes to the calibration I previously built, MY17 68FRE.... I also downloaded the latest v7.5 and v8. When I received the same error codes, I unistalled and reinstalled both V7.5 and v8. Any thoughts..?
    Last edited by GMPX; November 29th, 2017 at 04:58 PM.

  7. #7
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,803

    Default

    Quote Originally Posted by jk1956383 View Post
    I have downloaded them to my Dropbox. I am getting a few unusual errors.... When I try to open a 2013-2015 file, I get an unrecognized PCM error.
    You will get that on some of those OS's, it was just a mass collection of ones the factory has released over many years. All the latest factory updates in there should be supported, see the pdf below for a cross reference.
    http://kb.dcctools.com/index.php?Vie...6&AttachID=167

    Quote Originally Posted by jk1956383 View Post
    V7.5 will open a 2016-2018 file with no issue. However, when I try to save any changes to these files. I get an error 400000 code. I now can't make any changes to the calibration I previously built, MY17 68FRE.... I also downloaded the latest v7.5 and v8. When I received the same error codes, I unistalled and reinstalled both V7.5 and v8. Any thoughts..?
    I cannot duplicate this issue, but I am running some pre-release software that has being built after the public release.
    You are running these versions right?
    https://forum.efilive.com/showthread...ase-(Nov-2017)

    Cheers,
    Ross
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  8. #8
    New Member
    Join Date
    Oct 2017
    Posts
    8

    Default

    Quote Originally Posted by GMPX View Post
    You will get that on some of those OS's, it was just a mass collection of ones the factory has released over many years. All the latest factory updates in there should be supported, see the pdf below for a cross reference.
    http://kb.dcctools.com/index.php?Vie...6&AttachID=167


    I cannot duplicate this issue, but I am running some pre-release software that has being built after the public release.
    You are running these versions right?
    https://forum.efilive.com/showthread...ase-(Nov-2017)

    Cheers,
    Ross
    Yes, I just downloaded the link. Unfortunately, the issue is still present, Error # 400000.

  9. #9
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,803

    Default

    I've pulled the files down and deleted the links. They were accidentally created with software that will not be compatible with any public releases. I will revisit this next week to fix it.
    Last edited by GMPX; November 29th, 2017 at 05:20 PM.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


Similar Threads

  1. Replies: 3
    Last Post: September 6th, 2017, 02:29 PM
  2. 2016 or 2017 Stock Z06 LT4 file??
    By Longslyde in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 2
    Last Post: August 15th, 2017, 05:54 AM
  3. 2012 C6 M6 Base Model - Need base file!
    By GR8GAME in forum Gen IV V8 Specific
    Replies: 2
    Last Post: April 4th, 2016, 03:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •