I'm seeing on here that this is a pretty common thing, but didn't see any remedy. Went to flash a 2002 lb7, controller was licensed successfully but when I go to flash it I get this code. Any help would be appreciated.
Thanks
I'm seeing on here that this is a pretty common thing, but didn't see any remedy. Went to flash a 2002 lb7, controller was licensed successfully but when I go to flash it I get this code. Any help would be appreciated.
Thanks
Start with the basics, are you running the latest version of EFILive V7.5 and V8?
The public release is the latest available and has versions:
V8 Software: V8.2.8
FlashScan/AutoCal Firmware: V2.07.126 (Oct 18, 2017)
FlashScan/AutoCal Boot Block: V2.07.007 (Feb 07, 2014)
V7.5 Software: V7.5.13
Does this vehicle has any aftermarket modules on the VPW bus? If so, disable them all.
Do you have a bench harness and have you tried flashing on the bench?
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Create a help desk ticket https://support.efilive.com/ and submit the following files:
A (*.lbu) license backup file from your FlashScan device.
A file read from the ECM after the $0533 error occurred.
The (*.htx) trace file that is saved when the $0533 error occurs.
Regards
Paul
Before asking for help, please read this.
MJ,
Did this end up working for you? I have still not had my issue resolved from a year ago and I am trying to get it closed up as well....
https://forum.efilive.com/showthread...889#post238889
Thank you,
AC