Results 1 to 3 of 3

Thread: First timer here, about to tackle the 0411 swap

  1. #1
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default First timer here, about to tackle the 0411 swap

    Hello everyone! Name is Alex and I just opened this account to see if anyone can help me here. I have a 2011 BMW 550i with the twin turbo V8 and it's running great.

    Well...obviously this is not the car I'm here for haha.....lers try this again.

    I also have my 1996 Chevy c1500. Short can, long bed. Extremely basic. Carries the vortec 305 V8 and 700R4 electronic trans. My engine finally died after 250k miles. So I'm going to swap out a lot of things and cleaning her up and updating a lot of things on her to my standards.

    Here's what I have engine wise so far:

    Vortec 350 with only 65k miles, 880 block and 906 heads

    700R4 trans from a 94 that's been rebuilt by jaspers.

    Marine intake system with true mpi and will be modded for street use.

    So I have a nice project ahead of me, will be replacing seals, gaskets, paint etc.

    But I heard about the 0411 pcm swap on these vehicles. Heard it's the bees knees when it comes to tuning them. So....who can give me the rundown on what I need to get this ecu swap done and with what software I need to communicate with it. Cables, etc. I might also do the ls1 coil swap, I also have the dbw throttle body from the marine but also have the dbc stock if it be simplier to use like cruise control, etc.

    Thanks!

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Hi 550i,

    Welcome to the forum.

    Try here, they have conversion parts: https://www.eficonnection.com/

  3. #3
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Hello joecar, thanks for the quick reply. Yeah I saw their products so I'll be looking into it.

    But I heard tgat I'll need a pinot to swap the black box of he'll to the 0411. Heard Mr. Lextech (apologize if it's wrong) but can help on the proper pinouts to convert it.
    Last edited by 550ifreak; November 19th, 2017 at 05:04 AM.

Similar Threads

  1. 0411 swap issues
    By spastik monkey in forum Vortec V6/V8 Specific
    Replies: 4
    Last Post: March 31st, 2016, 09:45 AM
  2. 0411 Swap, O2 sensor wiring is different
    By nevinsb in forum Gen III V8 Specific
    Replies: 10
    Last Post: September 2nd, 2012, 01:36 AM
  3. 0411 Swap???'s
    By GAMEOVER in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: May 24th, 2011, 01:25 PM
  4. 0411 swap w/ one wire knock?
    By chevy052500hd in forum Gen III V8 Specific
    Replies: 14
    Last Post: July 13th, 2009, 01:50 AM
  5. 0411 Swap, Tach is off
    By chevy052500hd in forum Gen III V8 Specific
    Replies: 4
    Last Post: August 29th, 2008, 10:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •