Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: First timer here, about to tackle the 0411 swap

  1. #1
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default First timer here, about to tackle the 0411 swap

    Hello, I have a 96 c1500 and I'm throwing in my 350 vortec in there. I have the 0411 pcm, wanting to know what's all needed to make this work. Thanks!

  2. #2
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Since I noticed the post finally went through, let me tell you the story on this. You can disregard this portion if you don't to read it.

    Bought the truck for 600 dollars, from my fiance friend who is scared of driving it due to miles (250k). Got it going and running great. Has a 305 vortec v8 and a 700r4 electronic trans (same as 4l60e). Yesterday, it died on my driveway. Missing like hell. I also have my 65k mile 350 vortec I snagged for 600 with the 4x4 trans that I'm not using. The engine will be used. I also snagged a 700r4 trans from the wreckers for 150 that was rebuilt by jaspers. Anyways, I used the fuel spider, dizzy, rotor, wires, plufs, new fuel pump and filter, and ignition module and 5he engine still ran like crap.....until the real reason pops out. I was missing water out the exhaust, my radiator flushed out 6 gallons of water and my oil became coffee colored.

    Needless to say....its time lol.

    So I'm currently collecting parts, and upgrading too. I have the 350 vortec, marine intake with injectors, 0411 pcm from a 2002 express van with the vortec 350, hooker headers from a 94 lt1 camaro, and the 700r4 trans. So im excited to give her a nice heart and to keep miles off my 2011 550i that I have to daily for abit until this is done.

    I read a lot about the 0411 pcm and it's capabilities, sounds brass so hopefully I get support of this dated mod.

  3. #3
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    373

    Default

    Check this site --> http://www.gmtruckcentral.com/articles/12200411.html

    Then PM Lextech for the wiring schematic/pinout list. It's easier than it looks. Trust meh!
    2001 Camaro SS
    EFILive Custom OS3

  4. #4
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Thank you SS2win I have pmed lextech and awaiting his response. Hopefully it's as easy as it sounds. I'm sure the hardest part is getting the 411 tuned and code out vats and such.

  5. #5
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    373

    Default

    he's got a starter tune for you as well. the job is intimidating at first but once you get a few wires moved it rolls along pretty smoothly. read the spreadsheet twice. do one wire at a time. be SURE you move them to the right position and it's a breeze.
    2001 Camaro SS
    EFILive Custom OS3

  6. #6
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Sweet, this should be exciting. This will give the truck a new meaning haha. The marine intake will help too along with my hooker headers. It might not fit though so I may get the proper ones. I grabbed the headers from the junkyard from a 94 camaro z28 with the lt1.

  7. #7
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Looks like I'll be starting to tear out the old 305 out the truck soon. My upper intake should be here Monday and will tear down the 350 for a refresh.

    Does the pm works Here? I pmed lextech about the pinouts, hopefully he received them.

    I understand since it's thanksgiving, I'm sure a lot of people are out lol...

  8. #8
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Anyone?

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    pm's will be available to you after you do 10 thread posts.

  10. #10
    Junior Member
    Join Date
    Nov 2017
    Posts
    12

    Default

    Ahhh ok I wasn't aware of this restriction. Sorry about that, I'll get that taken care of.

Page 1 of 3 123 LastLast

Similar Threads

  1. First timer here, about to tackle the 0411 swap
    By 550ifreak in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: November 18th, 2017, 09:51 AM
  2. 0411 swap issues
    By spastik monkey in forum Vortec V6/V8 Specific
    Replies: 4
    Last Post: March 31st, 2016, 09:45 AM
  3. 0411 Swap, O2 sensor wiring is different
    By nevinsb in forum Gen III V8 Specific
    Replies: 10
    Last Post: September 2nd, 2012, 01:36 AM
  4. 0411 Swap???'s
    By GAMEOVER in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: May 24th, 2011, 01:25 PM
  5. 0411 Swap, Tach is off
    By chevy052500hd in forum Gen III V8 Specific
    Replies: 4
    Last Post: August 29th, 2008, 10:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •