Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Hopelessly stuck

  1. #11
    Member
    Join Date
    Oct 2003
    Posts
    71

    Default

    Quote Originally Posted by joecar View Post
    I'm curious to know which one.
    Stupidity strikes once again. While trying to sleep, it occurred to me that I had not heard the fuel pump run. Seems my Bosch pump does not always start. The motor runs fine with the VE testing tune as long as the pump starts
    I used to do embedded code, now I do linux device drivers ( which is sort of embedded code, but interfacing to (and running in) the OS kernel )
    Something like a fiber channel hard drive IIRC. I have embedded linux since it was stable, but haven't had to mess with drivers in a long time. It is quite complete now. Except for real time - I have to use Xenomai to take care of that.

  2. #12
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I do the linux driver for our FC initiator hba's (qla2xxx in the kernel tree)

  3. #13
    Member
    Join Date
    Oct 2003
    Posts
    71

    Default

    Quote Originally Posted by joecar View Post
    I do the linux driver for our FC initiator hba's (qla2xxx in the kernel tree)
    That is what I thought. What I do is not that exotic. I make instruments for the steel and iron industries. The main one tells them how much carbon and silicon are in the melt, what the carbon equivalent is, how much saturated carbon, and the brinell hardness.

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    That's a pretty interesting job, you have to have mechanical properties knowledge.

  5. #15
    Member
    Join Date
    Oct 2003
    Posts
    71

    Default

    I had to learn a bit of metallurgy, but the tricky part is finessing the A/D data to be able to get useful information. I use first and second derivatives which requires really smooth data to be meaningful.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Injector Stuck????
    By TravisF in forum Duramax LB7
    Replies: 2
    Last Post: May 5th, 2017, 06:22 PM
  2. Scanning stuck on general?
    By pavetim in forum General
    Replies: 5
    Last Post: November 23rd, 2010, 12:30 PM
  3. Stuck in 1st Gear!
    By TBMSport in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 8
    Last Post: November 4th, 2010, 07:11 PM
  4. stuck in 3rd??????
    By drdarthinvader in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 2
    Last Post: February 8th, 2009, 01:10 AM
  5. V2 stuck in reboot after 2.05.10 FW
    By Treurentner in forum FlashScan V2 BB Logging
    Replies: 21
    Last Post: December 3rd, 2007, 08:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •