Results 1 to 3 of 3

Thread: 2015.5 GM 8l90e T87 controller R&D help

  1. #1
    New Member Dr. Oldsmobile's Avatar
    Join Date
    Dec 2017
    Posts
    2

    Question 2015.5 GM 8l90e T87 controller R&D help

    Is there anyone that understands the 2015.5 - T87 transmission TCU code enough to do the inevitable and run the 8l90e standalone behind non chevy -B.O.P. ENGINES with a controller like tci or know of aftermarket efi ecu that will work in conjunction with t87? Holley has a efi ecu that runs a old trans

    Please no discussion on ancent 4l80e trans based on even more ancient th400. The cost and effort of 4l80e to only gain overdrive is not logical. 6l90 is a light duty trans. My Olds will dictate a heavy duty auto and the 8l is that trans.

    Thank you for any help

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi Dr.Olds,

    welcome to the forum

    what torque does your engine make, and how high does it spin...?

    Hopefully someone will know the answer.

  3. #3
    New Member Dr. Oldsmobile's Avatar
    Join Date
    Dec 2017
    Posts
    2

    Default

    Quote Originally Posted by joecar View Post
    Hi Dr.Olds,

    welcome to the forum

    what torque does your engine make, and how high does it spin...?

    Hopefully someone will know the answer.

    Hello. Thanks for reply.

    Engine spins to 5500 rpm. Oldsmobile is very torque orientated. Not high winding. Great for street duty.

    MONDELLO/Olds 361 - 420hp/450lbs tq. - ( boost comming soon)
    350 race prepped crank
    403 cryo treated rods / ARP
    4.125 - 425 pistons - 98 over bore - true 9.5 compression
    #6 - 1969 nos heads ported by Joe
    350 block decked - 100 thou
    Edlebrock performer duel plane milled 100 thou , fully ported by myself.
    Jack engle cam - .512 lift
    Msd - 6al
    Truely balanced and blueprint to under 3 thou variance��.
    Every trick Joe has was put into this engine.

Similar Threads

  1. 2015.5 lml t87 willing to test..
    By I_can_Break_It in forum Do you want to be a Beta Tester?
    Replies: 0
    Last Post: September 27th, 2015, 04:15 PM
  2. Vortec PCM/Controller not listed under DVT controller selection.
    By Scatfish in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: April 5th, 2015, 11:10 AM
  3. 2015 Navara ys23 engine controller
    By 68sstt in forum General (Diesel)
    Replies: 3
    Last Post: March 2nd, 2015, 01:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •