Results 1 to 5 of 5

Thread: VIN Won't Flash LS1B VIN 000

  1. #1
    New Member
    Join Date
    Apr 2017
    Posts
    3

    Default VIN Won't Flash LS1B VIN 000

    Hey everyone.

    When I flash this controller the VIN has all zeros. I'm not getting any error codes and otherwise the flash seems to work fine. This is using V8 on a bench harness or in the vehicle, full flash or cal. I can't get the VIN back on the controller. I can only find one thread related to that and he said it was fixed by updating. I've updated firmware and software and I don't know what else to try.

    Any help would be highly appreciated.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V8 build version are you running...?

  3. #3
    New Member
    Join Date
    Apr 2017
    Posts
    3

    Default

    V8.2.10 is that the build number or am I looking in the wrong place?

  4. #4
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    Change vin with 7.5 scanner
    "All that is needed for the triumph of evil is that good men do nothing..."

  5. #5
    New Member
    Join Date
    Apr 2017
    Posts
    3

    Default

    That worked. Thanks for your help!

Similar Threads

  1. V2 Flash Scan Vin Licenses
    By Age08 in forum FlashScan V2
    Replies: 7
    Last Post: October 3rd, 2017, 06:46 AM
  2. Bricking LS1B PCM by Changing VIN
    By minytrker in forum Gen III V8 Specific
    Replies: 15
    Last Post: December 14th, 2015, 01:02 PM
  3. changing vin on lmm to my suburban vin. is this doable?
    By Madspeed in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: September 24th, 2015, 02:14 AM
  4. what vin do i use the ecm vin or the dash vin
    By nycblazer in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 23rd, 2008, 03:31 AM
  5. Can i flash my VIN in a used PCM?
    By mvvette97 in forum Gen III V8 Specific
    Replies: 1
    Last Post: September 17th, 2007, 11:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •