Results 1 to 1 of 1

Thread: Cam Phaser idle position

  1. #1
    Junior Member pir4te's Avatar
    Join Date
    May 2011
    Posts
    43

    Default Cam Phaser idle position

    Please help, I need the cam phaser to be at a set position per the phaser table at idle.
    Problem is the OS overrides the table (when idle conditions are met) and parks the cam.
    How can I prevent the cam from parking at idle?
    I assume the V8 Hybrids (LFA/LZ1) only park the cam on commanded stop.
    Last edited by pir4te; January 15th, 2018 at 12:06 AM.

Similar Threads

  1. B7968 Cam Position Full Throttle
    By efilivesteven in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 4
    Last Post: August 1st, 2016, 12:39 PM
  2. Cam Phaser
    By samh_08 in forum Gen IV V8 Specific
    Replies: 3
    Last Post: November 11th, 2012, 07:38 PM
  3. E38 High Octane Spark{B5101} & Cam Phaser{B5154}
    By GAMEOVER in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: February 6th, 2011, 03:04 AM
  4. B5154 VVT Cam Phaser Timing
    By MN C5 in forum Gen IV V8 Specific
    Replies: 2
    Last Post: February 13th, 2008, 08:15 AM
  5. Cam Phaser
    By MN C5 in forum E37, E38 & E67 PFI ECM's
    Replies: 6
    Last Post: December 1st, 2007, 05:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •