Results 1 to 2 of 2

Thread: Cm848

  1. #1
    Member
    Join Date
    Jan 2016
    Posts
    74

    Default Cm848

    Who here has flashed a CM848? Has anyone BENCH flashed one with a Bench-Force?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Bench-Force should work well with these as it is done through the J1939 connections (which I am sure they have on their setup).
    Through J1939 you can read and flash, I don't think reading is possible via the SCI bus on the vehicle (via the OBD-II port).

    Edit: Please note that CM848 & CM846 (the early Dodge ECM's) are read and flash only, we don't support editing of these two ECM's and likely won't in the future.
    Last edited by GMPX; July 28th, 2021 at 10:49 AM.
    I no longer monitor the forum, please either post your question or create a support ticket.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •