Results 1 to 1 of 1

Thread: Strange engine behavior under load (possible free beer inside)

  1. #1
    Junior Member
    Join Date
    Jan 2018
    Posts
    18

    Default Strange engine behavior under load (possible free beer inside)

    Hello,

    This is my first post here so bear with me. I'm new to tuning engines but not new to engines as far as building them or theory of how they operate. My truck which is a 02 silverado with an ls6 with a zr1 cam and a whipple pushing 5 pounds on the upper end (5500) and roughly 9 pounds right around 3600. When progressively loading down the motor on the free way, I'm noticing a fuel cut and the transmission seems to come out of gear. on data logs the injector duty cycle drops to nothing. If I push the gas hard enough to kick down to the next gear fuel is back. fuel cut is around 4k but I've seen it as low as 2800. I've included my tune which is still somewhat rough. If anyone who has more knowledge than me in this field could possibly look it over to see if maybe some computer safeguard is kicking in to protect the engine that would be much appreciated since I'm not sure what i'm looking at. I can go out and log if need be and I would by whoever can help me get this figured out a case of beer to show appreciation.

    Thank you
    Attached Files Attached Files

Similar Threads

  1. Engine load to mandate when PE is needed or not
    By voda1 in forum Gen III V8 Specific
    Replies: 1
    Last Post: May 19th, 2016, 06:23 AM
  2. Strange advance behavior - 2006 Silverado 5.3 LS1B controller
    By trimchip in forum Gen III V8 Specific
    Replies: 3
    Last Post: April 28th, 2015, 06:53 PM
  3. Help! Strange Problem - Modified tune - no change in engine
    By Extinct in forum Vortec V6/V8 Specific
    Replies: 29
    Last Post: December 23rd, 2013, 03:34 AM
  4. Strange behavior of rpm when returning to idle
    By Corday in forum Gen III V8 Specific
    Replies: 5
    Last Post: August 22nd, 2011, 07:05 PM
  5. Engine Load PID
    By mr.prick in forum General
    Replies: 13
    Last Post: April 7th, 2009, 12:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •