Originally Posted by
engr7581
Hi Cindy
The below comments are pertaining to the recent tables added. I hope it helps.
In closed loop Modes 0-6 there are 4 ADDITIONAL tables that are responsible for turbo Max positions. They are 10 x 10 tables
There is, in addition an overall Min VGT actuator position table that compares Vref 0-26 volts to ECT in addition to the table that is already mapped by EFI Live. It is a 16 x 16 table
I have added those in via .cax awhile back after figuring out how to get them imported (what a pain)
I can fully control any VGT turbo/compound set up put on one of these trucks with the above.
Let me know and I can send the hex addresses or whatever you want for those to be added in, or let me know the appropriate route to get it done.
Under Injection Quantity/Post injection1/ The values are correct but the labeling is wrong as it is listed as "timing", they should be mm3 values.
Thanks