Results 1 to 5 of 5

Thread: T43 Table/s Request

  1. #1
    Lifetime Member
    Join Date
    May 2016
    Posts
    215

    Default T43 Table/s Request

    Are there tables mapped out for grade braking / shift schedules? Would like to back off the aggression of the downshift schedule when decending

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,781

    Default

    T43 will not be looked at further, additional enhancements were made last year then it was pushed to the back of the line.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    Lifetime Member
    Join Date
    May 2016
    Posts
    215

    Default

    Quote Originally Posted by GMPX View Post
    T43 will not be looked at further, additional enhancements were made last year then it was pushed to the back of the line.
    I'm aware there's much newer stuff to dedicate resources to, so I'll ask:
    Is there another compatible os that has these tables mapped out?

    Sent from my LG-H918 using Tapatalk

  4. #4
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,781

    Default

    Quote Originally Posted by hacklerjason View Post
    I'm aware there's much newer stuff to dedicate resources to
    That and it is over 10 years old now, yes there is newer things that have higher demand but last year we did put a call out to people saying ok what do you needed added because this controller is getting EOL as far as development scheduling goes.

    Quote Originally Posted by hacklerjason View Post
    Is there another compatible os that has these tables mapped out?
    It's been a while since I looked at a T43 file but it might just be a case of trying some of the other shift modes that are in there to see if that is what GM are using.
    They don't so much have specifically assigned operation, they have shift tables A, B, C, D etc and the platform it is used on assigns them to a particular function.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  5. #5
    Lifetime Member
    Join Date
    May 2016
    Posts
    215

    Default

    Quote Originally Posted by GMPX View Post
    That and it is over 10 years old now, yes there is newer things that have higher demand but last year we did put a call out to people saying ok what do you needed added because this controller is getting EOL as far as development scheduling goes.


    It's been a while since I looked at a T43 file but it might just be a case of trying some of the other shift modes that are in there to see if that is what GM are using.
    They don't so much have specifically assigned operation, they have shift tables A, B, C, D etc and the platform it is used on assigns them to a particular function.
    Understood...
    My truck application has 2 maps, normal and pattern a.... Normal is normal, and tow haul is pattern a per logged data. So I don't see any other tables in there for grade shifting schedules. I can't even see a map that looks like it would line up with what I see driving the truck depending a hill. When I tap the brake it downshifts, and I tap again it damn near redlines... I need to find that and fix it asap

    Sent from my LG-H918 using Tapatalk

Similar Threads

  1. Surging TCC Lockup - Table request
    By Tre-Cool in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 12
    Last Post: December 12th, 2017, 09:42 AM
  2. Request for raised mA table
    By 2007 5.9 in forum Cummins 6.7L
    Replies: 3
    Last Post: September 26th, 2017, 09:00 AM
  3. No A/C torque reduction table in E38 tune? B4358 spark table?
    By Mean Green Z28 in forum E37, E38 & E67 PFI ECM's
    Replies: 10
    Last Post: June 19th, 2014, 12:30 AM
  4. COS5 nitrous table request
    By johnv in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 5
    Last Post: August 19th, 2009, 03:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •