Results 1 to 3 of 3

Thread: Mustang PowerDyne Software with EFILive

  1. #1
    Junior Member GM-Josh's Avatar
    Join Date
    Jun 2016
    Posts
    14

    Default Mustang PowerDyne Software with EFILive

    Question, not to sure if this is a good location for this thread but anyhow. Does anyone use their mustang dyno and powerdyne software with EFILive? There's an option to direct connect to EFILive, just have a few question around setting it up. Using the OBDII splitter with my dyno and efilive is useless.

    Thanks in advanced

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,204

    Default

    You can't have two scantools running on the same OBD-II plug (eg the Dyno PC and EFILive talking at the same time to the car).
    For EFILive to work alongside a compatible dyno PC the connections are made to the V2 serial port instead. I'm sorry I don't know if that dyno is supported to do this.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    Junior Member GM-Josh's Avatar
    Join Date
    Jun 2016
    Posts
    14

    Default

    I don't use the splitter at all. For diesel I use the OBD-II plug to pull rpm, or use the optical pick-up if data-logging. The powerdyne PC has the EFILive otion in the menu, never noticed it until now. Was curious does it work with the Efilive scan tool while hooked to the serial com port with the powerdyne pc software running? looks as if it uses RPM from the EFIlive software only, not 100% sure will try using it at the end of the day.

Similar Threads

  1. EFILive Software Testing Guidelines
    By cindy@efilive in forum EFILive Beta Software
    Replies: 0
    Last Post: April 6th, 2016, 05:35 PM
  2. Replies: 2
    Last Post: January 27th, 2012, 02:55 AM
  3. Looking for help 03 6.0 powerdyne supercharger
    By oldblue_6 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 2
    Last Post: September 17th, 2010, 07:19 AM
  4. Stock LS1 with powerdyne 6 psi kit
    By hotrod in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 8
    Last Post: October 28th, 2009, 02:07 PM
  5. EFILive FlashScan V8 software WHEN???
    By kbracing96 in forum Lounge
    Replies: 6
    Last Post: June 5th, 2007, 01:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •