Results 1 to 2 of 2

Thread: LS2 E40 BMW swap, APP relearn?

  1. #1
    New Member
    Join Date
    Feb 2018
    Posts
    1

    Default LS2 E40 BMW swap, APP relearn?

    Hello all, we have a 2003 BMW with an LS2 and we are working to get the throttle pedal to function with the PCM. The car runs but throws high and low codes for the APP. The PCM does see the sweep from the APP but it doesn't read it correctly. People have done this swap and used HP Tuners to relearn the APP and then have it function properly. Does EFI live have this function?

  2. #2
    Lifetime Member
    Join Date
    Dec 2007
    Posts
    1,143

    Default

    It shouldn't need to be re-learned manually. It should "just" work. Does the throttle blade operate full sweep as you stroke the pedal? Are you sure it is the right pedal for the calibration in the E40?

Similar Threads

  1. 06 GTO LS2 E40 Swap No Crank/Start
    By daggetlover in forum Gen IV V8 Specific
    Replies: 12
    Last Post: February 20th, 2019, 06:58 AM
  2. 06 tbss e40 hanging throttle after ls2 car tb swap
    By b18cls1 in forum Gen IV V8 Specific
    Replies: 0
    Last Post: December 24th, 2011, 09:17 AM
  3. CASE relearn for PCM with new LS2?
    By ArKay99 in forum Gen IV V8 Specific
    Replies: 2
    Last Post: January 28th, 2008, 05:08 PM
  4. Cant log ls2 e40
    By Jakes4321 in forum Gen IV V8 Specific
    Replies: 4
    Last Post: October 29th, 2007, 10:20 AM
  5. Crank relearn necessary on engine swap
    By woody69 in forum General
    Replies: 1
    Last Post: January 6th, 2007, 05:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •