Results 1 to 3 of 3

Thread: CMC and CME Full fueling issues (tunes and logs)

  1. #1
    Junior Member
    Join Date
    Dec 2014
    Posts
    41

    Default CMC and CME Full fueling issues (tunes and logs)

    Hello,

    This CMC truck I am struggling to get to commanded fuel when the throttle is 100%. The truck has a s463 with a large turbine housing on it and is slow to make boost but I have done everything I can think of and it still seems it wont follow commanded fueling and waits until around 2400rpm to get to 165mm3.

    The CME truck I am working on is hitting some kind of timing limiter that I cannot seem to over come as well as a rpm limiter at 3000.

    Any help on either of these issue would be greatly appreciated.
    Thanks, Mario
    Attached Files Attached Files
    Last edited by rbp4u; March 2nd, 2018 at 10:13 AM.
    2011 6.7 Cummins, ARP 625's, 5" Flo-pro, S&B, Some Carli stuff, 35's

    2008 5.3L Chevy, Long tubes, CAI, 220 cam, 4.11's

  2. #2
    Lifetime Member
    Join Date
    Dec 2013
    Posts
    234

    Default

    PM'd you a few questions.

  3. #3
    Member
    Join Date
    Aug 2019
    Posts
    66

    Default

    Did you ever figure this out I am having somewhat of the same issue?

Similar Threads

  1. CMC High RPM Fueling
    By comnrailpwr in forum Cummins 6.7L
    Replies: 100
    Last Post: September 15th, 2020, 04:41 AM
  2. Replies: 5
    Last Post: January 15th, 2015, 05:49 AM
  3. built motor logs and tunes
    By Quinton in forum Duramax LLY
    Replies: 3
    Last Post: January 25th, 2014, 01:32 PM
  4. LS1B idle issues after full flash
    By Wheelz in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 25th, 2013, 02:17 PM
  5. 00 to 02 OS full flash issues
    By Slowrc in forum Gen III V8 Specific
    Replies: 5
    Last Post: November 12th, 2011, 07:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •