Results 1 to 10 of 22

Thread: Smalll Block 383 Stroker back on the road to completion

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Can do.

    That valley in the Cranking VE is there to compensate for flooding on startup with that Marine intake. If im not mistaken. Its been a while.

    Got the rest of it done.

    Trims should be re-enabled...

    Just got some news from my engine shop on the motor.

    Looks like one of the transmission I had hooked up to it at one point pressed very aggressively on the crank destroying the main seal and chewing up a bit of metal inside the engine. So all that has t be repaired as well.

    I highly doubt it was the Circle D tourq Converter that cause that issue. I would be more included to guess that it was the junk transmissions from Mad Dog Transmissions. Just another Bunch of $'s because of going with those guys.Trims Re-Enabled.ctz
    Last edited by HellKnightHicks; April 15th, 2018 at 07:38 AM.

Similar Threads

  1. 6l80e shift time completion
    By b18cls1 in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 26
    Last Post: June 14th, 2010, 02:58 PM
  2. Need some help with a 383 stroker
    By TransTech in forum Gen III V8 Specific
    Replies: 6
    Last Post: November 22nd, 2007, 05:59 AM
  3. Newbie 383 stroker question
    By TransTech in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: November 21st, 2007, 01:36 PM
  4. Stock cube's to 383
    By chevpower in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: July 17th, 2006, 09:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •