Results 1 to 2 of 2

Thread: 2.6 Degrees Knock

  1. #1
    Junior Member clubby5000i's Avatar
    Join Date
    Jul 2007
    Posts
    13

    Default 2.6 Degrees Knock

    Hi all,
    I have come across this before but can't remember what the answer was. E38 shows 2.6 degrees constant KNKRET until big throttle changes., then goes to 0. Anyone seen this before and know how to remedy?

    Cheers

  2. #2
    Junior Member
    Join Date
    Feb 2011
    Posts
    28

    Default

    Is B1940 all zero?

Similar Threads

  1. Knock knock, False knock? LS3 mutant in C5 car LS1 pcm
    By BHC5 in forum Gen III V8 Specific
    Replies: 8
    Last Post: July 6th, 2017, 08:14 AM
  2. Why always 10 Degrees at WOT
    By 1bar in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: November 6th, 2009, 12:56 PM
  3. engine pinging! knock retard 4 degrees?
    By silverada4.8 in forum Gen III V8 Specific
    Replies: 1
    Last Post: April 26th, 2009, 11:03 PM
  4. b7934 degrees
    By dynarex in forum Gen IV V8 Specific
    Replies: 0
    Last Post: February 17th, 2008, 02:30 PM
  5. Can you go from C to F degrees?
    By killaz in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 6th, 2006, 11:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •