Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Need help with BEN map

  1. #11
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by JoshH View Post
    I think I turned the MAF codes off,but I will re-enable them to make sure.
    Yes, MAF DTC's must be enabled... either 1-Trip or Non-Emissions.

  2. #12
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by JoshH View Post
    I haven't been using any filters on the map, and I have been copying and multiplying the whole table. I guess I have a lot more work ahead of me. I will read up on the transient filters. Is it preconfigured into the map already, or is it something I need to setup?
    I don't remember if the transient filter comes preconfigured... let me pull it up so you can copy.

    So should I try to focus my datalogs on one area of the map at a time? I have been trying to get 25ish minute long datalogs with a lot of varied MAP and RPM values to try to get the most thorough results. I may need to modify my method.
    Yes, one region at a time... keep throttle movements slow and to a minimum, use the brakes to load up the engine if necessary.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Replies: 30
    Last Post: April 8th, 2017, 09:59 AM
  2. BEN map not populating
    By jtcanyon in forum Petrol / Gas
    Replies: 1
    Last Post: April 29th, 2013, 05:14 AM
  3. Changing BEN map from AFR to ?
    By ssvolvo in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 7th, 2008, 05:48 AM
  4. Cell counts in BEN map
    By 67SS509 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: May 27th, 2007, 09:36 AM
  5. How can I reduce BEN Map values by 50%?
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 23rd, 2007, 01:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •