Results 1 to 3 of 3

Thread: B6612 Labels verification

  1. #1
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default B6612 Labels verification

    I need to verify B6612 Labels
    It seems the Y-axis is RPM while X-axis is Torque Limit% but I think it should be TPS% because the data in the table should be the Torque Limit%

    I'm I wrong ?
    EFILive Tuner

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I don't think the axis is TPS% sorry, but the description probably could have been better.
    I 'think' the way the table works is for a given percentage of torque reduction (the axis) the throttle (not TPS) can be reduced by 'x' amount in the table.
    Eg, for 100% reduction the throttle can be reduced by 100%, or for 20% reduction the throttle can be reduced by say 5%.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    660

    Default

    That does not make sense if the table is like that from facroty
    Because many people maxed all the table and have a very responsive or hang throttle but when zero it it will make the car have zero throttle movement and no response
    EFILive Tuner

Similar Threads

  1. MAF calibration and verification
    By warlock007 in forum Gen III V8 Specific
    Replies: 14
    Last Post: July 31st, 2013, 10:05 AM
  2. TCS and b6612
    By Highlander in forum Gen III V8 Specific
    Replies: 0
    Last Post: May 31st, 2009, 03:54 PM
  3. B6612 ETC LIMITING on 2002 L18
    By SHOGOR in forum Gen IV V8 Specific
    Replies: 9
    Last Post: March 21st, 2009, 12:05 AM
  4. Looking for 100% verification on compatibility.
    By 2kwik4u in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: May 14th, 2006, 02:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •