Results 1 to 4 of 4

Thread: Display IDC in Dashboard

  1. #1
    Member
    Join Date
    Feb 2011
    Posts
    53

    Default Display IDC in Dashboard

    Hi, It's been a while....

    I am trying to get my dashboard working for E38 to display IDC but for the life of me I cannot validate GM.IBPW1 or GM.IBPW2

    My software and firmware is updated, I have edited my calc_pids file to work with "validated" GM.INJPWB1 and GM.INJPWB2 but still no Bueno?

    I'm at a loss, need help please.

    calc_pids attached below.

    Thanks in advance for any direction in this issue.

    calc_pids.txt

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    GM.IBPW1 and GM.IBPW2 are for Gen III (0411, P01, P59 PCM's).

    You want GM.INJPWB1 and GM.INJPWB2 (your calc_pids.txt already uses these).


    Your calc_pids.txt is a mix of 0411/P1 and E38... you probably want the attached calc_pids.txt (rename it to calc_pids.txt).
    Attached Files Attached Files

  3. #3
    Member
    Join Date
    Feb 2011
    Posts
    53

    Default

    Thanks very much joecar.
    Will let you know how I go when I can had a crack at it

  4. #4
    Member
    Join Date
    Feb 2011
    Posts
    53

    Default

    All sorted thanks.

Similar Threads

  1. What pid do i need for IDC
    By Behold in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: October 16th, 2011, 08:40 PM
  2. Dashboard Display gone and I cant get it back
    By RMCorvette in forum General
    Replies: 6
    Last Post: January 20th, 2007, 02:58 AM
  3. scantool display to use as dash display?
    By ace68 in forum Lounge
    Replies: 0
    Last Post: March 3rd, 2006, 05:50 AM
  4. Make a "LED" display on a dashboard gauge
    By emarkay in forum Tips and tricks
    Replies: 3
    Last Post: September 4th, 2003, 06:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •