Hi
Is it possible to change the pulse rate per revolution of the tacho signal from the ECM, I am using this signal to drive the original tacho in the donner vehicle and is reading at aprox two thirds actual RPM that the CST2 shows.
Regards Bruce
Hi
Is it possible to change the pulse rate per revolution of the tacho signal from the ECM, I am using this signal to drive the original tacho in the donner vehicle and is reading at aprox two thirds actual RPM that the CST2 shows.
Regards Bruce
Regards Bruce
Nissan GU Patrol
06 LBZ Duramax, Allison trans
Transco JR kit and pump pressure upgrade
EGR removed, custom made inter-cooler pipework, DP5 switch